CDCS-VILT: Certified Data Centre Specialist (VILT)

Course Information

Course Name

CDCS-VILT: Certified Data Centre Specialist (VILT)

Exam code

CDCS

Duration

3 Days

Certification

Certified Data Centre Specialist

Overview

CDCS® (Certified Data Centre Specialist) is a 3-day advance level for training data centre design/build professionals.  The CDCS® course will cover engineering calculations on the various components in a data centre facility.  CDCS® will further increase attendees’ competences to a level of a compatible sparring partner with suppliers and verify offers provided by vendors for correctness, effectiveness and efficiency.

CDCS® is the second training in the EPI Design and Build training track under the EPI Data Centre Training Framework. Participants must hold a valid CDCP® certificate in order to be able to register for the CDCS® class. CDCS itself is a pre-requisite for persons wishing to achieve the CDCE® status.

Audience Profile

The primary audience for this course is an IT, Facilities or Data Centre Operations professional working in and around the data centre (representing both end-customers and/or service provider/facilitators) and having responsibility to achieve and improve high availability and manageability of the Data Centre, such as: Data centre managers, Operations / Floor / Facility managers, data centre engineers, network/system engineers, data centre sales/consultants.

Prerequisites

Participants must hold a valid CDCP® certificate in order to be able to register for the CDCS® class.

At Course Completion

After completing this course, you will be able to:

• Understand the design life cycle of data centres and the stages involved

• Discuss the data centre requirements in great level of detail with vendors, suppliers and contractors to ensure that these requirements are met

• Validate design plans, quotes and offers proposed by vendors/contractors

• Understand redundancy levels for both the data centre design/setup and maintenance

• Understand the various building considerations such as bullet proofng, mitigation of seismic activity, fire ratings and thermal stability

• Understand how to install a raised floor that meets requirements, avoiding misalignment, level differences and leakage

• Understand how to read a Single Line Electrical Diagram to identify and avoid the most common design issues

• Choose the correct UPS and parallel configuration, learn and avoid classic parallel installation mistakes

• Understand how to calculate battery banks, validate offered configurations to ensure they meet requirements

• Understand what distance to keep to avoid EMF issues for human safety and equipment disturbances

• Understand the fundamental cooling setup, CFM, Delta-T and other important factors

• Understand contamination factors and limitations

• Understand full details of fire suppression options, how to calculate gas content and verify installations

• Understand how to measure data centre energy efficiency and how to improve it

Exam: Certified Data Centre Specialist (CDCS®)

Attendees will take a 1.5 hour CDCS® exam. The exam is 60 questions, multiple choice, closed-book. The passing mark is 45 out of 60.

Attendees passing the exam will be awarded the internationally accredited and recognized ‘Certified Data Centre Specialist’ certificate (CDCS®).

CDCS® is globally accredited by EXIN, a fully independent exam and certification institute. The CDCS® certificate is valid for 3 years, after which recertification is required.

Course Outline

Module 1: Data Centre Design / Life Cycle Overview

• Overview of the phases of a data centre life cycle

• Planning, re-alignment and continuous improvement

Module 2: Standards and Rating Level Definitions

• Rating level history

• Standards and guidelines compared (TIA-942, ISO 22237, EN 50600, UTI)

• Rating level definitions

• Redundancy options (N+1), 2N, 2(N+1)

• Concurrent Maintainability/Compartmentalisation

• Example configurations

• Substation and feed requirements

• Maintenance options

• Operational processes guidelines/standards

• Skill development

Module 3: Building Considerations

• Building location considerations

• Floor and hanging loads requirements

• Fire rating for walls and glass

• Blast protection

• Bullet proofing

• Forced entry protection

Module 4: Advanced Raised Floor & Suspended Ceiling

• Raised floor installation guidelines

• Techniques to install a proper and leveled raised access floor

• Common mistakes

• Choosing the right tiles and their locations

• Seismic-mitigating floor constructions

• Choosing the correct suspended ceiling

Module 5: Advanced Power

– Power infrastructure layout;

• Formulas which you should know for the data centre

• Single Line Electrical diagrams; how to read to ensure key components are present for protection

• Over current protection devices (MCB/MCCB/VCB/ACB/Fuses) definitions and what to use where

• Earth Leakage devices (RCB/RCD/ELCB/GFCI/ALCI/RCBO), definitions and what to use where

• Sizing of protective components

• Lightning strikes and surge protection devices (TVSS/SPD), how they operate, where to use and how to install

• Power cabling and cable run considerations

• PDU/DB setup and minimum requirements

– Generators;

• Generator types: Standy/Prime/Continuous

• Component make up and functions

• Fuel storage and calculation

• Paralleling of gen-sets

• Generator room/area requirements

– UPS Systems;

• Required specifications for UPS systems

• How to read data sheets and select the correct UPS

• Requirements for parallel configurations and avoid pitfalls such as single point of failures

• How parallel installation should be done, classic mistakes made by installers and how to avoid these

– Harmonic Filters;

• Active/Passive filters and their application

– Battery Banks;

• Battery bank terminology

• Designing battery banks, how to calculate, and double check the battery bank to be installed

• Battery charging pitfalls and ensuring the right charger is being installed and used

• Using parallel battery banks; how to properly install them, limitations and risks when using batteries in parallel

• How to test batteries correctly and make decisions on cell/block or string replacement

• Battery casing choices; ABS, V0, V1, V2

• Alternative energy storage; flywheel, re-usable cell, compressed air UPS, etc.

Module 6: Advanced Electro Magnetic Fields

• Sources of EMF

• Difference between single, three phase and bus-bar EMF

• Options available to measure EMF and how to interpret the results from single-axes and composite measurements

• Guidance on safe distance for equipment and humans

• Calculation of EMF attenuation factor for shielding material permeability and saturation factors

Module 7: Advanced Cooling

• Important definitions; dry-bulb, wet-bulb, dew-point, RH, sensible and latent heat

• Psychometric chart and ASHRAE recommendations

• Environmental class definitions and thermal specifications

• Temperature/humidity measurements guideline

• Heat dissipation methods

• Altitude impact on temperature intake to ICT equipment

• Floor plan setup for effective cooling

• Differences in tile surface and supporting structure and the air-flow performance impact

• Rack door construction and the flow performance impact

• Equipment Delta-T and its impact

• Optimising airflow

• Thermal units conversions

• Calculations for air volume displacement (CFM/CMH)

• Cooling capacity calculations

• Air-conditioning selection

• De- / humidifying options

• Air conditioning efficiency

• SHR impact on cost saving

• Efficiency indicator

• New cooling principle and techniques (Submerged, VSD/VRF/ECF/water- and air side economisers)

• Redundancy guidelines for air-conditioners avoiding classic misconceptions and mistakes for meeting ANSI/TIA-942 compliant designs

• Installation requirements

• Connections to fire panel and EPO

• Commissioning of air conditioners

• Set points and calibration

• CFD (Computational Fluid Dynamics)

Module 8: Advanced Fire Protection

• The fire triangle and elements to stop a fire

• Detection systems in detail (VESDA, VIEW, smoke sensors)

• Considerations for installation of sensors

• Proper testing of smoke sensors

• Water based systems i.e. deluge, wet-pipe, dry-pipe, pre-action and why most of them don’t work and how to detect this

• Details on Inert and Halocarbon systems and how to select the correct system for your data centre

• How to calculate the gas content ensuring the appropriate level is installed to suppress the fire including safety considerations

• Other requirements for gas systems such as release times, hold times, pipe install requirements and other important factors

• Requirements for the fire detection panel

• Installation verification, methods, what to check and how

• New advanced fire suppression technologies

Module 9: Design and Install Scalable Networking Cabling System

• ANSI/TIA942 cabling structure topology

• Copper and fiber cabling

• ToR, EoR Design

• Intelligent patching systems

• Installation best practice such as routing, bending radius, separation from power, containment fill ratio, fiber link loss calculator, bonding and grounding requirement

• Standard for telecommunications labeling and administration

Module 10: Environmental Specifications and Contamination Control

• Acoustic noise effects, regulations, specifications and limits

• Data centre contaminations and classifications

• Measurements, standards and limits

• Preventive measures and avoidance

Module 11: Data Centre Efficiency

• Business drivers to go Green

• Sustainability versus high-availability

• Green guidelines and standards

• Power Usage Effectiveness (PUE), values, classes, considerations and improvements

• Open Compute Project (OCP)

• Savings on cooling infrastructure

• Savings on light infrastructure

Module 12: Mock Exam

 All EPI certification courses are conducted by certified trainers from Iverson.

Digital Methods acts as the official training partner and assists with program consultation, registration, coordination, scheduling, and administrative arrangements to ensure a seamless and professionally managed training experience.